The information provided about Super Lube products demonstrates their load-bearing capacity in various tests and bearing types. Here is an overview of the test results:

- Load wear index: This test measures a lubricant's ability to prevent wear under load. Higher values indicate better wear protection. Super Lube Grease with Syncolon® (PTFE) has the highest load wear index at 70.63 kg, indicating strong wear resistance compared to the other Super Lube products tested.

- Weld point: This measures the load at which the lubricant fails under extreme pressure. Super Lube Grease with Syncolon® (PTFE) also has the highest weld point at 400 kg, indicating that it can withstand higher pressure before failing compared to the other products.

- Timken OK load, ASTM D2509: This measures the load-bearing capacity of lubricating greases. A Timken OK Load of 40 lbs indicates the load at which the lubricant effectively prevents metal-to-metal contact. Both Super Lube Grease with Syncolon® (PTFE) and Super Lube Oil with Syncolon® (PTFE) have the same value of 40 lbs, indicating comparable load-bearing capacity.

- Four-ball scar test, ASTM D4172: This test evaluates the extreme pressure properties of the lubricant. Smaller scar diameters indicate better protection against wear. In this test, Super Lube Grease with Syncolon® (PTFE) has the smallest scar diameter, followed by Super Lube Lightweight Oil and Super Lube Oil with Syncolon® (PTFE), indicating their respective performance under extreme pressure conditions.

When considering whether Super Lube is suitable for a specific bearing, it is essential to check the bearing manufacturer's specifications or the load capacity required for that bearing. By comparing these specifications with the load ratings of Super Lube products in the Timken OK Load or Four Ball EP tests, you can determine whether Super Lube meets or even exceeds the load requirements for that specific bearing.

If the load ratings of Super Lube products are equal to or higher than the load requirements specified by the bearing manufacturer, it is likely that Super Lube® meets the load requirements and provides adequate lubrication for the bearing.